|
This page contains many
wireless security devices that will,
when used in conjunction with the
driveway alarms advertised on the
earlier pages, provide an excellent
level of security and deterrence to any
unwanted guests.
TELEPHONE
DIALER WITH ENTRY/EXIT DELAY
The Dial Alert is a device that you can
place in your home or office which will
automatically dial up to nine
pre-programmed phone or pager numbers of
your choice in the event of a problem.
Features:
Can be activated by several different
accessory sensors
Plays a 40 second personalized message
for each of the numbers you have
programmed
Entrance and exit delay of up to 75
seconds to allow deactivation
Battery backup
The following
accessories may be used with the dialer
to optimize you security:
 WIRELESS
PIR SENSOR
This is a wireless passive infrared
sensor that will transmit a wireless
signal to the telephone dialer whenever
an intruder enters an unauthorized area.
This unit detects the heat from the
person as they move into the area
covered. The sensor will cover an area
of about 40' by 40'. Several
transmitters may be used to monitor
different locations. The PIR sensor
operates by a 9 volt battery.
 WIRELESS
TEMPERATURE SENSOR
The temperature alert
sensor detects a temperature drop or
rise. This unit works well when used in
conjunction with the dialer to monitor
homes, stores, outbuildings, etc when
you are away. In the event of a heat
rise or loss the sensor will activate
the dialer to alert the proper parties.
The sensor's range is from -20 degrees
to 110 degrees F and may be adjusted to
the high and low temperatures you
require.
 |
WIRELESS DOOR CONTACTS |
The wireless door
contacts may be mounted on any door and
will activate the dialer when the door
is opened. The contacts, which use a 9
volt battery, work well with the dialer
because they make full use of entry and
exit delay on the dialer.
 |
WIRELESS HANDHELD
TRANSMITTER |
This small transmitter
, which uses a 9 volt battery, can be
carried in a pocket or purse. It can
activate dialer up to 300 feet away. It
may also be used as a panic button to
summon for help for those store with
limited security that operate late
hours, such as convenience stores.
SIREN
The 12 volt DC siren
can be plugged into the dialer and will
sound when activated. The siren is
designed for exterior us and could be
used to scare off an intruder. 120 DB
TIMER/ LIGHT CONTROL
The timer control ,
when activated by our wireless drive
alert, is normally used for security
reasons. It has the ability to turn on
lights, bells, horns, etc that can be
set to stay on for 2,5,10 minutes and
then will shut off automatically, or you
may have the light, etc . turn on until
manually reset The control unit has an
on/off switch for use your convenience.
Installation is very easy- just connect
the timer to the dry contacts on the
receiver and plug in the light. The
timer control can turn on up to 250
watts of light.
LOUD RINGING BELL
This 6" bell can be
used with any of the driveway alarms. It
can be used outside or inside for people
with hearing problems. When used in
conjunction with the light/timer control
it may be programmed to ring up to one
hour.
LINE CARRIERS
These are designed to
send a remote signal from one building
to another, providing that all locations
are downstream from one power
transformer. Plug the transmitter into a
110 volt outlet in one building, and
throughout your existing power lines, it
will trip the receiver in another
building. The transmitter can be
activated by a driveway alarm. A loud
bell or light plugged into the receiver
would be activated.
|
 |
STROBE |
|
|
|
|
This strobe can be
used for the hearing impaired as
well for use in noisy environments.
The amber color is best suited for
this purpose. The strobe has a flash
rate of 90 flashes per minute.
|
|
LINE
DRIVER
